I do custom gun work as well as cleaning, repair, stippling, part fitting, trigger jobs, Cerakote™, install handgun sights and rifle scope installation.
Shop rate is $40 an hour with a 1 hour minimum.
I NEVER mark up parts! I can install parts you bought. If I have to order parts I will only charge you what the part and any shipping cost is, not a cent more.
I offer a 10% discount for first responders and military, both active and prior/retired. (Since I don't mark up parts, the discount is only for labor.)
I fitted a not-so-"semi drop in" Bar-Sto threaded barrel on this Kimber Pro Raptor II. Kimber has extremely tight tolerance so a lot of fitting was needed. I bet it would have dropped right in on a Colt.
Customer brought this by and asked me if there was anything I could do about the trigger. It is a Beretta from the 50's with Italian markings chambered in '9mm short' or .380 as we call it in this country. I put my trigger gauge on it and it maxed it out without dropping the hammer. The best I could guess was the trigger weight was around 12-13lbs!! After some work I was able to get the weight down to 4.5-5 and smoothed out the action to make it more pleasant to shoot.
This is a Savage 93 in 22lr. I added some custom oak spacers to the butt of the stock. I added a Picatinny rail to the butt of the stock to add an adjustable cheek rest. I added a Picatinny rail to the fore end for the bi-pod. I installed a 8-32x40 Mil-dot scope. This is a pre-accutrigger 93 so I did a trigger job on this and got it down to just under 2lbs since the customer uses this for benchrest shooting only. Super smooth and ultra accurate!
This was a custom build for a customer that wanted his 10/22 to look and feel more like an AR. SR22 stock installed. Threaded barrel with 'mock' suppressor. AR carbine quad rail with rail covers. M4 style stock. Simmons 3-9x40 scope. And a trigger job done on this as well.